It’s important to know a little bit about your trolling engine before you go fishing. If you want to catch more fish, and keep your motor running smoothly, there are a few things you need to know. These are some tips to help you get started.
Ensure that the PARTS are LUBED and GREASED
The manufacturer’s specifications for lubricating and greasing your trolling motor should be followed. This will prevent motor wear and prolong the motor’s life.
CHOOSE RIGHT TROLLING MOTOR TO PERFORM THE JOB
You need the right motor to do the job, no matter if you are fishing in salt or fresh water. Even though the motor will still work, a trolling motor for freshwater is different from one for saltwater. Saltwater rusts metal so motors for saltwater must be made differently. Make sure that you select the trolling motor that is best suited for the type and amount of fishing you are doing.
A GPS-controlled trolling motor might be something you want to look into. This trolling motor is easy to use. You may also call it a trolling engine with autopilot.
KNOW IF IT IS FOOT OR HAND OPERATED
There are two types of trolling motors, hand and foot-operated. You need to know which one you have as a trolling motor that is foot-operated must be lifted and cleaned out of weeds. An electric motor that is hand-operated can be reversed. It will often release the weeds, without needing to be lifted or cleaned.
REMOVE EXCESSIVE POWER FROM SHALLOW WATER
Fishing in shallower waters doesn’t require you to use too much power. You can adjust the speed of your trolling motor to fish in shallower waters.
CHOOSE THE RIGHT ASSESSORIES
You can make a big difference in the accessories you select. A breakaway mount is recommended for high thrust motors. A spring-loaded mounting can fail if there is too much force. A breakaway mount will prevent you from having to go to the repair shop.
Props are important as they can ensure that you use your motor correctly. At least three props should be available for every day of fishing. A spare is great in case the first breaks. But you never know when the second one might break.
KEEP YOUR UNIT CLEAN
It is important to keep your trolling motor clean to maximize its performance. There are many things that can build up on your trolling motor, such as weeds and grime. A little soap and water can help keep it clean. To keep it clean, you can spray silicon on the shaft.
ALWAYS INSPECT BEFORE USAGE
Before you use the trolling motor, inspect all props and the whole trolling motor. You should inspect the trolling motor and props at least once a week. However, it is advisable to check for cracks, bends, or other damage on a regular basis. It’s not a good idea to go out and find that your trolling motor is having problems.
These are just some of the many tips you can use to trolling motors. Before you head out on your next fishing trip, make sure that you are familiar with how your trolling motor works.
The article was written by a professional charter captain at Salty Knots Fishing Charters with 15+ years of experience in the Gulf of Mexico. Salty Knots Fishing Charters is a local fishing charter service based out of St. Pete Beach, Florida. “We know what it takes to catch a giant trophy fish!” Salty Knots Is the best when it comes to St Petersburg Fishing Charters.
Leave a Reply